This page is for an old version of Hexaly Optimizer. We recommend that you update your version and read the documentation for the latest stable release.

LSModel Class

class localsolver::LSModel

Mathematical optimization model.

A model is composed of expressions (some of which are decisions), organized as a tree. Then, some expressions of the model can be constrained or optimized. Once your optimization model is created and closed, the solver can be launched to resolve it. Note that you cannot modify a model which has been closed: you must reopen-it (with open()) or instantiate another LocalSolver environment to optimize another model.

See:

LSExpression

LSOperator

Summary

Functions
createConstant Creates a constant expression representing the given value.
createNativeFunction Creates a native function.
createExpression Creates an expression of the given type.
boolVar Creates a boolean decision.
floatVar Creates a float decision.
intVar Creates an integer decision.
sum Creates a sum expression.
sub Creates a substraction expression.
call Creates a call expression.
prod Creates a product expression.
max Creates a maximum expression.
min Creates a minimum expression.
or_ Creates an OR expression.
and_ Creates an AND expression.
xor_ Creates a XOR expression.
not_ Creates a NOT expression.
eq Creates an equality expression.
neq Creates a disequality expression.
geq Creates an inequality expression greater than or equal to.
leq Creates an inequality expression less than or equal to.
gt Creates an inequality expression greater than.
lt Creates an inequality expression less than.
iif Creates a ternary conditional expression.
abs Creates an absolute value expression.
dist Creates a distance expression.
div Creates a division expression.
mod Creates a modulo expression.
array Creates an array expression.
at Creates a “at” expression for 1-dimensional array.
scalar Creates an expression for the scalar product between two arrays.
ceil Creates a ceil expression.
floor Creates a floor expression.
round Creates a rounding expression.
sqrt Creates a square root expression.
log Creates a log expression.
exp Creates an exponential expression.
pow Creates a power expression.
cos Creates a cosine expression.
sin Creates a sine expression.
tan Creates a tangent expression.
piecewise Creates a piecewise linear expression.
listVar Creates a list decision with the given length.
count Creates a count expression.
indexOf Creates an indexOf expression.
partition Creates a partition expression.
disjoint Creates a disjoint expression.
function Creates a function expression.
getNbExpressions Gets the number of expressions added to this model.
getExpression Gets the expression with the given index in this model.
getNbDecisions Gets the number of decisions in the model.
getDecision Gets the decision with the given index.
addConstraint Adds the given expression to the list of constraints.
constraint Shortcut for addConstraint(expr).
removeConstraint Removes the given expression from the list of constraints.
getNbConstraints Gets the number of constraints added to this model.
getConstraint Gets the constraint with the given index.
addObjective Adds the given expression to the list of objectives to optimize.
minimize Shortcut for addObjective(expr, OD_Minimize).
maximize Shortcut for addObjective(expr, OD_Maximize).
removeObjective Removes the objective at the given position in the list of objectives.
getNbObjectives Gets the number of objectives added to this model.
getObjective Gets the objective with the given index.
getObjectiveDirection Gets the direction of the objective with the given index.
getNbOperands Gets the number of operands in the model.
close Closes the model.
open Opens or reopens the model.
isClosed Returns true if the model is closed, false otherwise.
toString Returns a string representation of this model.

Functions

LSExpression createConstant(lsint value)

Creates a constant expression representing the given value.

Only allowed in state S_Modeling. Note that if a constant has been already created with the same value, this method can return the same expression, but it is not guaranteed. The exact behavior is implementation defined.

Return:Created constant expression.
Parameters:value - Value of the constant.

LSExpression createConstant(lsdouble value)

Creates a constant expression representing the given value.

Only allowed in state S_Modeling. Note that if a constant has been already created with the same value, this method can return the same expression, but it is not guaranteed. The exact behavior is implementation defined.

Return:Created constant expression.
Parameters:value - Value of the constant

LSExpression createNativeFunction(LSNativeFunction *func)

Creates a native function.

Once you instanciated it, you have to pass arguments to your function and call it. For that, you have to create expressions of type O_Call. The first operand must be your native function. The other operands must be LSExpressions. Their value will be made accessible to your native function through the native context.

Note 1: Most of the time your native function will be called when the solver is in state S_Running. Do not attempt to call any method of the solver (to retrieve statistics, values of LSExpressions or whatever) in that state or an exception will be thrown. The only accessible function is LocalSolver#stop().

Note 2: Your functions must be thread-safe. According to the “nbThreads” parameter, LocalSolver can be multi-threaded. In that case, your native functions must be thread safe. If you cannot guarantee the thread-safety of your code, we strongly recommend you to limit the search of LocalSolver to one thread with LSParam#setNbThreads.

Note 3: LocalSolver do not manage memory of objects created outside of its environment. Thus, you have to explicitely delete your LSNativeFunction at the end of the search.

Return:The expression associated to the function.
See:O_NativeFunction
Since:6.0
Parameters:func - Native function to call.

LSExpression createExpression(LSOperator op)

Creates an expression of the given type.

The expression is created without operand. Only allowed in state S_Modeling. This method cannot be used to create constants: use createConstant(lsint) or createConstant(lsdouble) instead.

Return:Created expression.
Parameters:op - Type of expression to create.

template <typename T0>
LSExpression createExpression(LSOperator op, T0 expr0)

Creates an expression of the given type, with the given operand.

Only allowed in state S_Modeling. Useful for creating unary expressions. The operand can be a double, an integer or a previously declared LSExpression.

Return:

Created expression.

Templates:

T0 - type of the operand to add. Types allowed: constant types or LSExpression.

Parameters:
  • op - Type of expression to create.
  • expr0 - Operand 0.

template <typename T0, typename T1>
LSExpression createExpression(LSOperator op, T0 expr0, T1 expr1)

Creates an expression of the given type, with the given ordered operands.

Only allowed in state S_Modeling. Useful for creating binary expressions.

The operands can be doubles, integers or previously declared LSExpressions. It is also possible to use this method with iterators. In that case, expr0 and expr1 must be iterators of the same type, pointing respectively to the initial and final positions of the operands

Return:

Created expression.

Templates:
  • T0 - type of the operand to add. Types allowed: constant types, LSExpression or iterator.
  • T1 - type of the operand to add. Types allowed: constant types, LSExpression or iterator.
Parameters:
  • op - Type of expression to create.
  • expr0 - Operand 0.
  • expr1 - Operand 1.

template <typename T0, typename T1, typename T2>
LSExpression createExpression(LSOperator op, T0 expr0, T1 expr1, T2 expr2)

Creates an expression of the given type, with the given ordered operands.

Only allowed in state S_Modeling. Useful for creating ternary expressions (in particular, O_If expressions). The operands can be doubles, integers or previously declared LSExpressions.

Return:

Created expression.

Templates:
  • T0 - type of the operand to add. Types allowed: constant types or LSExpression.
  • T1 - type of the operand to add. Types allowed: constant types or LSExpression.
  • T2 - type of the operand to add. Types allowed: constant types or LSExpression.
Parameters:
  • op - Type of expression to create.
  • expr0 - Operand 0.
  • expr1 - Operand 1.
  • expr2 - Operand 2.

LSExpression boolVar()

Creates a boolean decision.

Binary decision variable with domain [0.1].

See:O_Bool
Since:5.5

LSExpression floatVar(lsdouble min, lsdouble max)

Creates a float decision.

Decision variable with domain [min,max].

See:O_Float
Since:5.5

LSExpression intVar(lsint min, lsint max)

Creates an integer decision.

Decision variable with domain [min,max].

See:O_Int
Since:5.5

LSExpression sum()

Creates a sum expression.

See:O_Sum
Since:5.5

template <typename T0>
LSExpression sum(T0 expr0)

Creates a sum expression.

See:O_Sum
Since:5.5

template <typename T0, typename T1>
LSExpression sum(T0 expr0, T1 expr1)

Creates a sum expression.

See:O_Sum
Since:5.5

template <typename T0, typename T1>
LSExpression sub(T0 expr0, T1 expr1)

Creates a substraction expression.

See:O_Sub
Since:5.5

template <typename T0>
LSExpression call(T0 expr0)

Creates a call expression.

See:O_Call
Since:6.0

template <typename T0, typename T1>
LSExpression call(T0 expr0, T1 expr1)

Creates a call expression.

See:O_Call
Since:6.0

template <typename T0, typename T1, typename T2>
LSExpression call(T0 expr0, T1 expr1, T2 expr2)

Creates a call expression.

See:O_Call
Since:6.0

LSExpression prod()

Creates a product expression.

See:O_Prod
Since:5.5

template <typename T0>
LSExpression prod(T0 expr0)

Creates a product expression.

See:O_Prod
Since:5.5

template <typename T0, typename T1>
LSExpression prod(T0 expr0, T1 expr1)

Creates a product expression.

See:O_Prod
Since:5.5

LSExpression max()

Creates a maximum expression.

See:O_Max
Since:5.5

template <typename T0>
LSExpression max(T0 expr0)

Creates a maximum expression.

See:O_Max
Since:5.5

template <typename T0, typename T1>
LSExpression max(T0 expr0, T1 expr1)

Creates a maximum expression.

See:O_Max
Since:5.5

LSExpression min()

Creates a minimum expression.

See:O_Min
Since:5.5

template <typename T0>
LSExpression min(T0 expr0)

Creates a minimum expression.

See:O_Min
Since:5.5

template <typename T0, typename T1>
LSExpression min(T0 expr0, T1 expr1)

Creates a minimum expression.

See:O_Min
Since:5.5

LSExpression or_()

Creates an OR expression.

See:O_Or
Since:5.5

template <typename T0>
LSExpression or_(T0 expr0)

Creates an OR expression.

See:O_Or
Since:5.5

template <typename T0, typename T1>
LSExpression or_(T0 expr0, T1 expr1)

Creates an OR expression.

See:O_Or
Since:5.5

LSExpression and_()

Creates an AND expression.

See:O_And
Since:5.5

template <typename T0>
LSExpression and_(T0 expr0)

Creates an AND expression.

See:O_And
Since:5.5

template <typename T0, typename T1>
LSExpression and_(T0 expr0, T1 expr1)

Creates an AND expression.

See:O_And
Since:5.5

LSExpression xor_()

Creates a XOR expression.

See:O_Xor
Since:5.5

template <typename T0>
LSExpression xor_(T0 expr0)

Creates a XOR expression.

See:O_Xor
Since:5.5

template <typename T0, typename T1>
LSExpression xor_(T0 expr0, T1 expr1)

Creates a XOR expression.

See:O_Xor
Since:5.5

template <typename T0>
LSExpression not_(T0 expr0)

Creates a NOT expression.

See:O_Not
Since:5.5

template <typename T0, typename T1>
LSExpression eq(T0 expr0, T1 expr1)

Creates an equality expression.

See:O_Eq
Since:5.5

template <typename T0, typename T1>
LSExpression neq(T0 expr0, T1 expr1)

Creates a disequality expression.

See:O_Neq
Since:5.5

template <typename T0, typename T1>
LSExpression geq(T0 expr0, T1 expr1)

Creates an inequality expression greater than or equal to.

See:O_Geq
Since:5.5

template <typename T0, typename T1>
LSExpression leq(T0 expr0, T1 expr1)

Creates an inequality expression less than or equal to.

See:O_Leq
Since:5.5

template <typename T0, typename T1>
LSExpression gt(T0 expr0, T1 expr1)

Creates an inequality expression greater than.

See:O_Gt
Since:5.5

template <typename T0, typename T1>
LSExpression lt(T0 expr0, T1 expr1)

Creates an inequality expression less than.

See:O_Lt
Since:5.5

template <typename T0, typename T1, typename T2>
LSExpression iif(T0 expr0, T1 expr1, T2 expr2)

Creates a ternary conditional expression.

See:O_If
Since:5.5

template <typename T0>
LSExpression abs(T0 expr0)

Creates an absolute value expression.

See:O_Abs
Since:5.5

template <typename T0, typename T1>
LSExpression dist(T0 expr0, T1 expr1)

Creates a distance expression.

See:O_Dist
Since:5.5

template <typename T0, typename T1>
LSExpression div(T0 expr0, T1 expr1)

Creates a division expression.

See:O_Div
Since:5.5

template <typename T0, typename T1>
LSExpression mod(T0 expr0, T1 expr1)

Creates a modulo expression.

See:O_Mod
Since:5.5

LSExpression array()

Creates an array expression.

See:O_Array
Since:5.5

template <typename T0, typename T1>
LSExpression array(T0 expr0, T1 expr1)

Creates an array expression.

See:O_Array
Since:5.5

template <typename T0, typename T1>
LSExpression at(T0 arrayExpr, T1 index1)

Creates a “at” expression for 1-dimensional array.

See:O_At
Since:5.5

template <typename T0, typename T1, typename T2>
LSExpression at(T0 arrayExpr, T1 index1, T2 index2)

Creates a “at” expression for 2-dimensional array.

See:O_At
Since:5.5

template <typename T0, typename T1, typename T2, typename T3>
LSExpression at(T0 arrayExpr, T1 index1, T2 index2, T3 index3)

Creates a “at” expression for 3-dimensional array.

See:O_At
Since:5.5

template <typename T0, typename T1>
LSExpression scalar(T0 expr0, T1 expr1)

Creates an expression for the scalar product between two arrays.

See:O_Scalar
Since:5.5

template <typename T0>
LSExpression ceil(T0 expr0)

Creates a ceil expression.

See:O_Ceil
Since:5.5

template <typename T0>
LSExpression floor(T0 expr0)

Creates a floor expression.

See:O_Floor
Since:5.5

template <typename T0>
LSExpression round(T0 expr0)

Creates a rounding expression.

See:O_Round
Since:5.5

template <typename T0>
LSExpression sqrt(T0 expr0)

Creates a square root expression.

See:O_Sqrt
Since:5.5

template <typename T0>
LSExpression log(T0 expr0)

Creates a log expression.

See:O_Log
Since:5.5

template <typename T0>
LSExpression exp(T0 expr0)

Creates an exponential expression.

See:O_Exp
Since:5.5

template <typename T0, typename T1>
LSExpression pow(T0 expr0, T1 expr1)

Creates a power expression.

See:O_Pow
Since:5.5

template <typename T0>
LSExpression cos(T0 expr0)

Creates a cosine expression.

See:O_Cos
Since:5.5

template <typename T0>
LSExpression sin(T0 expr0)

Creates a sine expression.

See:O_Sin
Since:5.5

template <typename T0>
LSExpression tan(T0 expr0)

Creates a tangent expression.

See:O_Tan
Since:5.5

template <typename T0, typename T1, typename T2>
LSExpression piecewise(T0 expr0, T1 expr1, T2 expr2)

Creates a piecewise linear expression.

See:O_Piecewise
Since:5.5

LSExpression listVar(lsint a)

Creates a list decision with the given length.

See:O_List
Since:5.5

template <typename T0>
LSExpression count(T0 expr0)

Creates a count expression.

See:O_Count
Since:5.5

template <typename T0, typename T1>
LSExpression indexOf(T0 expr0, T1 expr1)

Creates an indexOf expression.

See:O_IndexOf
Since:5.5

LSExpression partition()

Creates a partition expression.

See:O_Partition
Since:5.5

template <typename T0, typename T1>
LSExpression partition(T0 expr0, T1 expr1)

Creates a partition expression.

See:O_Partition
Since:5.5

LSExpression disjoint()

Creates a disjoint expression.

See:O_Disjoint
Since:5.5

template <typename T0, typename T1>
LSExpression disjoint(T0 expr0, T1 expr1)

Creates a disjoint expression.

See:O_Disjoint
Since:5.5

LSExpression function(LSNativeFunction *func)

Creates a function expression.

This method is a shortcut for createNativeFunction.

See:

O_NativeFunction

createNativeFunction

Since:

6.0

int getNbExpressions() const

Gets the number of expressions added to this model.

Return:Number of expressions.

LSExpression getExpression(int exprIndex) const

Gets the expression with the given index in this model.

Return:Expression with the given index.
Parameters:exprIndex - Index of the expression.

LSExpression getExpression(const std::string &name) const

Gets the expression with the given name.

Throws an exception if no expression with the given name exists.

Return:Expression with the given name.
Parameters:name - Name.

int getNbDecisions() const

Gets the number of decisions in the model.

This corresponds to the number of decision variables declared in the model.

Return:Number of decisions.

LSExpression getDecision(int decisionIndex) const

Gets the decision with the given index.

Return:Decision with the given index.
Parameters:decisionIndex - Index of the decision.

void addConstraint(const LSExpression &expr)

Adds the given expression to the list of constraints.

It means that the value of this expression must be constrained to be equal to 1 in any solution found by the solver. Hence, only boolean expressions (that is, expressions whose value is boolean) can be constrained. Only allowed in state S_Modeling. If the expression is already a constraint, this method does nothing and returns immediately.

Try to avoid hard constraints as much as possible, because LocalSolver (and more generally local search) is not suited for solving hardly constrained problems. In particular, banish constraints that are not surely satisfied in practice. Ideally, only combinatorial constraints (which induce the combinatorial structure of your problem) have to be set. All the other constraints can be relaxed as primary objectives in order to be “softly” satisfied (goal programming). For instance, constraint a <= b can be transformed into minimize max(b-a, 0).

Parameters:expr - Expression.

void constraint(const LSExpression &expr)

Shortcut for addConstraint(expr).

See:addConstraint
Since:5.5
Parameters:expr - Expression.

void removeConstraint(const LSExpression &expr)

Removes the given expression from the list of constraints.

If the expression was not constrained, this method does nothing and returns immediately. Only allowed in state S_Modeling.

Since:5.0
Parameters:expr - Expression.

void removeConstraint(int constraintIndex)

Removes the constraint at the given position in the list of constraints.

Only allowed in state S_Modeling.

Since:5.0
Parameters:constraintIndex - position of the constraint to remove.

int getNbConstraints() const

Gets the number of constraints added to this model.

Return:Number of constraints.

LSExpression getConstraint(int constraintIndex) const

Gets the constraint with the given index.

Return:Constraint with the given index.
Parameters:constraintIndex - Index of the constraint.

void addObjective(const LSExpression &expr, LSObjectiveDirection direction)

Adds the given expression to the list of objectives to optimize.

A same expression can be added more than once. Only allowed in state S_Modeling. Note that the objectives will be optimized in the order in which they have been added to the model. It is useful for lexicographic multiobjective optimization, and more particularly for goal programming.

Parameters:
  • expr - Expression.
  • direction - Optimization direction of this objective.

void minimize(const LSExpression &expr)

Shortcut for addObjective(expr, OD_Minimize).

See:addObjective
Since:5.5
Parameters:expr - Expression.

void maximize(const LSExpression &expr)

Shortcut for addObjective(expr, OD_Maximize).

See:addObjective
Since:5.5
Parameters:expr - Expression.

void removeObjective(int objectiveIndex) const

Removes the objective at the given position in the list of objectives.

Note that the objectives created after the removed one have their index decreased by 1. Phases are not modified when an objective is removed. It is the user’s responsibility to change the objective index of each phase to keep it coherent (with LSPhase#setOptimizedObjective), or to disable it (with LSPhase#setEnabled). Only allowed in state S_Modeling.

Since:5.0
Parameters:objectiveIndex - position of the objective to remove.

int getNbObjectives() const

Gets the number of objectives added to this model.

Return:Number of objectives.

LSExpression getObjective(int objectiveIndex) const

Gets the objective with the given index.

Return:Objective with the given index.
Parameters:objectiveIndex - Index of the objective.

LSObjectiveDirection getObjectiveDirection(int objectiveIndex) const

Gets the direction of the objective with the given index.

Return:Objective direction.
Parameters:objectiveIndex - Index of the objective.

int getNbOperands() const

Gets the number of operands in the model.

This corresponds to the number of operands for all expressions declared in the model. It is an analog of the number of non zeros in matrix model encountered in mathematical programming: it gives an hint about the size and the density of your model.

Return:Number of operands.

void close()

Closes the model.

Only allowed in state S_Modeling. Once the model is closed, no expression, constraints or objectives can be added. The model must be closed before starting its resolution.

void open()

Opens or reopens the model.

When this method is called, the solver is placed in state S_Modeling. Only allowed in state S_Stopped.

bool isClosed() const

Returns true if the model is closed, false otherwise.

Return:True if the model is closed.

std::string toString() const

Returns a string representation of this model.

This representation provides:

  • The number of expressions, decisions, constraints, and objectives.
  • The density of the model. Useful for debugging or logging purposes.

Return:String representation.